HOME | DD
Azerik92 — Acid Pit Array v1.0
Published: 2011-02-23 03:28:36 +0000 UTC; Views: 1104; Favourites: 18; Downloads: 22
Redirect to original
Description
A request from an FMA site that I didn't get around to doing before it tanked.This Array makes a pit in the ground, and uses Hydrogen, Sulfur, and Oxygen in the air to create Sulfuric Acid inside the pit.
Related content
Comments: 7
Yeah, considering the availability of fluorine and antimony and its absurd pH level (-25, or so I heard) it wouldn't make much of a pit... It does get the job done a lot faster though.
👍: 0 ⏩: 1
Well the idea behind the request was a pit of acid that would slowly and painfully hurt the enemy. If the user decided to speed things up, they could just toss their water bottle in or something.
👍: 0 ⏩: 0
Something to note is that sulfuric acid on its own isn't too bad. When you add water to it, or add it to water, then the combination makes it potentially lethal.
👍: 0 ⏩: 2
Incorrect. Pure Sulfuric acid is naturally corrosive, and adding water to it does increase its lethality, but the reverse, adding the acid to water, slightly dilutes the acid causing a less dangerous reaction.
Keep in mind that this Array makes a pit filled with Sulfuric Acid, meaning if you're inside it, that means you are practically covered in the acid, so no matter how slow the corrosion, you're in for a rough time.
👍: 0 ⏩: 0
Hydrogen and Oxygen are always easily at hand. The whole mix would easily be possible with a fair bit of water, and some sulfur. Unless you wanted to use some of Notshurly's nuclear array pieces.
👍: 0 ⏩: 0