HOME | DD

Description
THIS IS NOW UPDATED, NEW VERSION CAN BE FOUND HERE:

Mature Content

Greetings, I'm releasing a new version of my Wrinkled Sole Displacement Map for Genesis 3/8. It was made for Genesis 8 but it seems to work just fine with Genesis 3 as well. Recommended settings below. There will also be a link to the Stash download below as well. I just want to say a few things about it real quick.

The map is free, but if you use it and you really like the results, I'd really appreciate a small donation to my paypal (send a Note if you're interested) since this was a ton of work and a ton of trial & error. Monetization isn't my motivation, that's why it's free. I would appreciate it nonetheless.

This map is not perfect, there's even a teensy artifact strip along outer edge of her feet, although it's really hard to tell. Everything else should be fine, let me just write up those settings.

Displacement Strength: 1.00
Minimum Displacement: -0.6
Maximum Displacement: 0.6

SubD Displacement Level: 50 (Honestly, I'm not even sure what this does. Maybe it's there to match the subD of the model, I'm not sure. The value of "2" works for me as well, but I've also just gone "50" not sure why though.)

Finally, the human model's subdivision is set to a minimum at "2." There will be weird, geometric artifacts if you don't increase the subdivision on your model.

-Keep the min/max displacement levels the same, or the model's geometry will get weird.
-Wrinkle the right or left sole exclusively, make copies of the Displacement Map and just erase the side you won't want wrinkles on and save them separately.
-The map might look incompatible with your model's Normal / Bump Maps.. maybe. I say look because it'll still function okay, but the maps might conflict with how they're uniquely mapped. Normal Maps fake lighting and bumps, and if those cross path with the Displacement Map, well, you can see how it might look off.
-Stay safe and have fun!

Description
THIS IS NOW UPDATED, NEW VERSION CAN BE FOUND HERE:

Mature Content

Greetings, I'm releasing a new version of my Wrinkled Sole Displacement Map for Genesis 3/8. It was made for Genesis 8 but it seems to work just fine with Genesis 3 as well. Recommended settings below. There will also be a link to the Stash download below as well. I just want to say a few things about it real quick.

The map is free, but if you use it and you really like the results, I'd really appreciate a small donation to my paypal (send a Note if you're interested) since this was a ton of work and a ton of trial & error. Monetization isn't my motivation, that's why it's free. I would appreciate it nonetheless.

This map is not perfect, there's even a teensy artifact strip along outer edge of her feet, although it's really hard to tell. Everything else should be fine, let me just write up those settings.

Displacement Strength: 1.00
Minimum Displacement: -0.6
Maximum Displacement: 0.6

SubD Displacement Level: 50 (Honestly, I'm not even sure what this does. Maybe it's there to match the subD of the model, I'm not sure. The value of "2" works for me as well, but I've also just gone "50" not sure why though.)

Finally, the human model's subdivision is set to a minimum at "2." There will be weird, geometric artifacts if you don't increase the subdivision on your model.

-Keep the min/max displacement levels the same, or the model's geometry will get weird.
-Wrinkle the right or left sole exclusively, make copies of the Displacement Map and just erase the side you won't want wrinkles on and save them separately.
-The map might look incompatible with your model's Normal / Bump Maps.. maybe. I say look because it'll still function okay, but the maps might conflict with how they're uniquely mapped. Normal Maps fake lighting and bumps, and if those cross path with the Displacement Map, well, you can see how it might look off.
-Stay safe and have fun!