HOME | DD

Omron In reply to BladeMarth [2006-02-03 14:06:16 +0000 UTC]

It's built up from 10 layers, most of them are Sine from mt.ucl and on each layer I applied Turbulence and Perlin noise-3D from mt.uxf, and on the bottom layer I applied the Lake effect from sg.uxf.

TheAwakening {
; Copyright © 2006 by Redshift.
fractal:
title="The Awakening" width=790 height=666 layers=1
credits="Redshift;2/3/2006"
layer:
method=multipass caption="Background" opacity=100
mapping:
center=-2.4554823865/0.02992078995 magn=2.3530297 angle=90.0058
stretch=1.0544 skew=-0.0006 transforms=3
transform:
filename="Standard.uxf" entry="Lake" p_wl=0.18737/0.428622
p_use_sc=yes p_rot=90 p_use_la=no p_a=0.1 p_f=300.0
transform:
filename="mt.uxf" entry="mt-3D-perlin-noise" p_dist_style=Turbulence
p_strength=0.1 p_angle=30.0 p_octaves=7 p_persistence=0.5
f_fn1=ident p_z=0.0 p_scale=1.0 p_offset=0/0 p_seed=1234567
transform:
filename="mt.uxf" entry="mt-turbulence" p_modeistort p_r=0.1
p_threshold=0.0 p_octaves=7 p_persistence=0.5 p_push=0.0 p_scale=1.0
p_offset=0/0 p_reverse=no f_fn1=ident
formula:
maxiter=100 percheck=off filename="Standard.ufm" entry="FastJulia"
p_seed=0.425/0.1875 p_bailout=4.0
inside:
transfer=none
outside:
transfer=linear filename="mt.ucl" entry="mt-sine" p_coord=Cartesian
p_trap_mode=Closest p_color=Imag p_skip=0 p_size=0.1 p_ht=4.0
p_ha=0.6 p_vt=9.0 p_va=0.3 f_fn1=exp f_fn2=sqr f_fn3=sin
gradient:
smooth=yes rotation=-8 index=67 color=3827107 index=100
color=6316181 index=114 color=6985162 index=150 color=2113632
index=225 color=9219002 index=392 color=14745599
opacity:
smooth=no index=0 opacity=255 index=95 opacity=255 index=154
opacity=255 index=178 opacity=255 index=232 opacity=255
}

Here's the first layer, it's showing much of the resulting image already, (copy the whole part, including the last bracket, and paste it into your Ultra Fractal screen) hope this helps

Pieter

👍: 0 ⏩: 1

BladeMarth In reply to Omron [2006-02-04 09:16:54 +0000 UTC]

Thank you so much for sharing your wisdom! I'll be sure to try this out later! You are the most amazing fractal artist I've seen, im honoured to have your help! ^^ Thanks!

👍: 0 ⏩: 1

Omron In reply to BladeMarth [2006-02-04 21:18:49 +0000 UTC]

You're very welcome

👍: 0 ⏩: 0

Omron In reply to Qutey [2006-01-29 00:00:57 +0000 UTC]

Thanks for your comment, about the reflection part, I only used the lake effect on the bottom layer, I didn't want the whole image to be reflected, it would have made the image dull imo.

👍: 0 ⏩: 1

Qutey In reply to Omron [2006-02-03 01:35:09 +0000 UTC]

Ah I thought it was both reflected and lake effect on it, still lovely and I agree, the contrast between the two sections is part of the beauty.

👍: 0 ⏩: 0

Omron In reply to DonXavier [2006-01-28 11:49:54 +0000 UTC]

I used Turbulence and Perlin noise-3D from mt.uxf, and on the bottom layer I applied the Lake effect from sg.uxf, good luck

👍: 0 ⏩: 1

DonXavier In reply to Omron [2006-01-28 16:04:49 +0000 UTC]

Many thanks.

👍: 0 ⏩: 0