HOME | DD
SiathLinux — Project 19a
by-nc-nd
Published: 2008-05-20 02:30:24 +0000 UTC; Views: 617; Favourites: 4; Downloads: 0
Redirect to original
Description
Project 19aProject Siath Speed - render a
I have a lot to fix on the framing - but wanted let everyone see the basic concept.
Front is to the left - as the car is mid engine the rear transaxle layout.
Hope you enjoy
Related content
Comments: 98
I had already done a 'tubular' wheel before - so thought to make it a bit different for this one
👍: 0 ⏩: 1
sorry, i meant circular tubular sections on the chasis / frame :S
👍: 0 ⏩: 1
Oh, those are harder for me to weld together and make look right - I may do that with a later version ;D
👍: 0 ⏩: 1
Ah fair enough, hope you do make one like that
👍: 0 ⏩: 1
yeah, I'll have to as that is how most of these cars are actually built.
👍: 0 ⏩: 1
👍: 0 ⏩: 1
The 'final' is up - although that is not 'really' the final - as this is one of those projects that I'll come back to later and add to regularly
👍: 0 ⏩: 0
very nice work you have done a great job on the wheels the look very nice! ^_^ Cant wait to see the next update! ^^
👍: 0 ⏩: 1
I have commented! ^^
👍: 0 ⏩: 1
More coming VERY soon
...............................
I tend to do things in order on DA in order to best use my time here - Check notes, messages, deviations, then if I have something to upload I upload - I then do my thing in Blender for a while and while it does a test render I again check notes, messages, and deviations.
👍: 0 ⏩: 0
Your modeling has improved a lot over the months.
Are you going to leave the frame simple? I think it'd be cool to throw in a whole drive system with suspension. The hard part would be making the turning system for the front; but it'd definitely be rewarding.
👍: 0 ⏩: 1
I plan on doing everything suspension and steering wise - also will do 'block' engine and 'block' transaxle in order that I can do the turbos, intercoolers, and dual radiators...
👍: 0 ⏩: 1
Thanks, I've redone the frame and it look 100% better. started on the front body section...
👍: 0 ⏩: 1
your welcome -
yes , just remember your mantra ~"3D"~"3D"~"3D"~
*part humor , part not '' ~`...
👍: 0 ⏩: 2
yes , it looks like it is '
👍: 0 ⏩: 0
Yeah - it's going to be cool
👍: 0 ⏩: 1
yes , it looks like it is '
👍: 0 ⏩: 1
I've most of the 'basic' front sections shaped - a lot of smoothing and such will need to be done.
👍: 0 ⏩: 1
alright , although i have no idea how it's gonna look (body wise) ~`...
👍: 0 ⏩: 1
Well, I'm hoping it will look cool...
👍: 0 ⏩: 1
well , the part u have does - i was meaning i doesn't know your body idea ~`...
👍: 0 ⏩: 1
Function before form is always my design concept - so if there is an opening it will serve a purpose... smooth and low -- it's a single seater by the way..
👍: 0 ⏩: 1
alright then - no guest 
👍: 0 ⏩: 1
Yeah, it's meant to an RSR car (ready set race)
👍: 0 ⏩: 1
alright then -
* well , with that new blender cloth u could wave the checkered
flag `hehe ~`...
👍: 0 ⏩: 1
Yeah, how do you attach the 'cloth' object to another object with out causing the 'non cloth' part from becoming cloth??
👍: 0 ⏩: 1
don't know ?? haven't tried that yet - some constraint or child /parent
But there is stuff to read just ain't read any yet ~`...
👍: 0 ⏩: 1
Yeah, I've been trying to read about the various things... I downloaded the latest version - I'll see about installing it tomorrow..
👍: 0 ⏩: 1
yes , very good - i ain't really sure where 2 read at - like 4 the new features
i think u will like it ~`...
👍: 0 ⏩: 1
They are listed at the web site.
👍: 0 ⏩: 1
well , thanks - i'll go look `...
👍: 0 ⏩: 0
You should try to add a subsurf modifier to your tires, they will come out alot smoother. But it looks really nice, keep it up.
👍: 0 ⏩: 1
hmm, I've never done anything with subservice modifiers... how do they work..?
👍: 0 ⏩: 1
You are using Blender, right?
👍: 0 ⏩: 2
Correct (not latest version however - I'm still on 2.45 for a few more days)
👍: 0 ⏩: 1
| Next =>