HOME | DD
sodormatchmaker — Willaim Sprite V2
Published: 2014-11-30 02:37:46 +0000 UTC; Views: 1835; Favourites: 18; Downloads: 17
Redirect to original
Description
I saw that 's sprite of Willaim needed some improvements. So I decided to make some edits. Hope you, and like it.Edit: Took off the glasses.
Thomas and Friends (C) Hit Entertainment and Mattel
The Railway Series (C) The Awdry Family
Sprite (C) :iconsteamdiese:, Zack and Me
OC (c) and
Related content
Comments: 40
no problem. but can I just ask for one teeny little edit. I was just wondering if we can ditch the glasses on him? If that's alright please. 
👍: 0 ⏩: 1
oh thank you that looks great 
👍: 0 ⏩: 1
There are many problems associated with the valve motion and timing so close to the ground. I would suggest a jackshaft drive or taller driving wheels, although the jackshaft would be easier and more stable at speed.
👍: 0 ⏩: 1
I would also suggest either grouping the axles closer or adding in another one. The current spacing is adequate, but if another axle were added, there would be better adhesion and weight distribution to the rails. If you grouped theme closer, it could take tighter corners.
👍: 0 ⏩: 1
The locomotive also lacks a large coal supply, which makes sense on an industrial locomotive.
👍: 0 ⏩: 1
I see. In the picture, I saw he had a wooden box on his boiler. I thought that would be the bunker.
👍: 0 ⏩: 1
Yes, although this would be suitable for industrial areas, I'm assuming that's where the engine runs?
👍: 0 ⏩: 1
OK. I would also suggest a larger firebox for said application. Fuel consumption is of less concern.
👍: 0 ⏩: 1
More steam would need to be raised for the start/stop motion of an industrial locomotive.
👍: 0 ⏩: 1
The boiler is also relatively thin for such a small locomotive and I am unsure of it's steaming capacity.
👍: 0 ⏩: 1
